Account Page Definitions - Grandstream Networks GXP1100 User Manual

IP Setting
IPv4 Address
IPv6 Address
Subnet Mask
Gateway
DNS Server 1
DNS Server 2
NTP Server
PPPoE Link Up
802.1q/802.1p(LLDP)
802.1q/VLAN Tag
802.1q Priority
NAT Traversal
Status -> System Info
Product Model
Part Number
Software Version
System Up Time
System Time
Service Status
Core Dump

ACCOUNT PAGE DEFINITIONS

Account 1 -> General Settings
Account Active
Account Name
SIP Server
Secondary SIP Server
FIRMWARE VERSION 1.0.8.4
DHCP, Static IP or PPPoE.
The IPv4 address obtained on the phone.
The IPv6 address obtained on the phone.
The subnet mask obtained on the phone.
The gateway address obtained on the phone.
The DNS server address 1.
The DNS server address 2.
The NTP server phone uses to sync up time.
PPPoE connection status.
The 802.1q/802.p status.
The assigned VLAN tag on phone.
The assigned 802.1q priority on phone.
NAT traversal status for each account.
Product model of the phone.
Product part number.

Boot: boot version number;

Core: core version number;

Base: base version number;

Prog: program version number. This is the main firmware release number,
which is always used for identifying the software system of the phone;

Aux: Aux version number;

Dsp: DSP version number.
System up time since the last reboot.
Current system time on the phone system.
GUI and Phone service status.
Core dump file that could be downloaded for troubleshooting purpose.
Activates/deactivates account. The default setting is "Yes".
The name associated with the SIP account.
The URL or IP address, and port of the SIP server. This is provided by your
VoIP service provider (ITSP).
The URL or IP address, and port of the SIP server. This will be used when the
GXP1100/GXP1105 USER MANUAL Page 28 of 53