Download Print this page

Icom IC-F3262D series Instructions page 2

Vhf dpmr handheld transceivers

Advertisement

BATTERY CHARGING
D
Charging with the BC-160
You can rapidly charge the Li-ion battery pack with the
BC-160.
• Charging time
Approximately 3 hours for the BP-232WP
The following items are additionally required:
• A power adapter (may be supplied with the charger,
depending on the charger version) or the OPC-515L/
CP-23L DC power cable.
Power adapter
(A different type, or no power adapter is supplied,
Transceiver
depending on the charger's version.)
Turn power
Battery
OFF
pack
Optional OPC-515L* (for a
13.8 V power source) or
CP-23L (for a 12 V cigarette
lighter socket) can be used
instead of the power adapter.
*
CAUTION: NEVER
connect the OPC-
515L to a power
source using reverse
polarity. This will ruin
the battery charger.
White line:
Black line :
D
Rapid charging with the BC-119N+AD-106
You can rapidly charges the Li-ion battery pack with the
optional BC-119N.
Charging time: Approximately 3 hours for the BP-232H
The following items are additionally required.
• AD-106 charger adapter (purchase separately)
• A power adapter (may be supplied with BC-119N,
depending on the charger version) or the OPC-515L/
CP-23L DC power cable.
Power adapter
(A different type, or no
Turn OFF
Battery
power adapter is sup-
the power
pack
plied, depending on the
Transceiver
charger's version.)
AD-106
charger
adapter is installed
in the BC-119N.
Optional OPC-515L* (for a
13.8 V power source) or
CP-23L (for a 12 V cigarette
lighter socket) can be used
instead of the power adapter.
*
CAUTION: NEVER connect the OPC-
515L to a power source using reverse
polarity. This will ruin the battery charger.
White line:
Black line :
D
AD-106 installation
You must install the AD-106
into the
charger adapter
BC-119N
or BC-121N
-
desktop charger
multi
charger
before charging any batteries.
q Connect the AD-106 and the BC-119N/BC-121N.
w
Install the AD-106 into the holder space of the BC-119N/
BC-121N with the supplied screws.
AD-106
Plugs
Screws supplied
with the charger
adapter
Sockets
This illustration shows
the BC-119N.
D
Rapid charging with the BC-121N+AD-106
You can charge up to 6 battery packs with the optional
BC-121N.
Charging time: Approximately 3 hours for the BP-232H
The following items are additionally required.
(purchase separately)
• Six AD-106 charger adapters
• BC-157S power adapter or the OPC-656 DC power cable
Turn OFF the power
Battery
Transceiver
pack
AD-106 charger
adapters are installed
in each slot.
OPC-656* DC power cable
Power adapter
Connect to a 13.8 V, 7 A (min.)
power supply
*Polarity of the OPC-656
Red line:
Black line:
– 2 –
BATTERY CHARGING (Continued)
IMPORTANT: Battery charging caution
Ensure the guide tabs on the battery pack are correctly
aligned with the guide rails inside the charger adapter.
This illustration is for the BC-160.
CAUTION:
When using the OPC-656 DC power cable
NEVER reverse the polarity when connecting the
OPC-656 to a power source. This will ruin the battery
charger.
OPC-656: Red line: +, Black line: _
OPTIONS
D
BATTERY PACKS
• BP-232WP
i-ion
l
battery pack
2250 mAh (min.) 2300 mAh (typical)
Voltage: 7.4 V, Capacity:
Battery life: (Digital mode) Approximately 14.5 hours
(Analog mode) Approximately 13 hours
When the power save function is set to "Short," and the operating
periods are calculated under the following conditions:
TX:RX:standby = 5:5:90
• BP-240/BP-261
battery case
BP-240: For AAA (LR03) × 6 alkaline
BP-261: For AA (LR6) × 6 alkaline
BP-240 and BP-261 have IPX4 waterproof protection. When in
use, the transceiver's waterproof rating meets IPX4.
D
DC CABLES
• CP-23L
cigarette lighter cable
Used when charging battery packs through a 12 V cigarette
lighter socket. For use with the BC-119N/BC-160 chargers.
• OPC-515L/OPC-656
dc power cables
Used when charging battery packs using a 13.8 V DC power
source instead of the power adapter.
OPC-515L: For the BC-119N/BC-160
OPC-656: For the BC-121N
D
CHARGERS
• BC-119N
+ AD-106
desktop charger
charger adapter
+ BC-145S
power adapter
For rapidly charging of battery packs.
A power adapter may be supplied, depending on the charger's version.
Charging time: Approximately 3.5 hours for the BP-232WP.
• BC-121N
-
+ AD-106
(6 pcs.)
multi
charger
charger adapter
+ BC-157S
power adapter
For rapidly charging of up to 6 battery packs simultaneously.
Six AD-106s are required.
A power adapter or a DC power source must be purchased separately.
Charging time: Approximately 3.5 hours for the BP-232WP.
• BC-160
+ BC-145S
desktop charger
power adapter
For rapidly charging of battery packs.
A power adapter may be supplied, depending on the charger's version.
Charging time: Approximately 3.5 hours for the BP-232WP.
Tabs
Guide rail
D
BELT CLIPS
• MB-93
swivel belt clip
• MB-94/MB-94R
belt clip
Alligator-type belt clip.
• MB-96N/MB-96F
leather belt hanger
D
ANTENNAS
• FA-SC56VS/FA-SC57VS/FA-SC73US
stubby antennas
Shorter VHF or UHF antennas.
FA-SC56VS: 150–162 MHz
FA-SC57VS: 160–174 MHz
FA-SC73US: 450–490 MHz
• FA-SC25V/FA-SC55V/FA-SC03U
FA-SC25U/FA-SC57U/FA-SC72U
flexible antennas
VHF or UHF antennas.
FA-SC25V: 136–150 MHz
FA-SC55V: 150–174 MHz
FA-SC03U: 380–430 MHz
FA-SC25U: 400–430 MHz
FA-SC57U: 430–470 MHz
FA-SC72U: 470–520 MHz
• FA-SC61VC/FA-SC61UC
cut antennas
FA-SC61VC: 136–174 MHz
FA-SC61UC: 380–520 MHz
• FA-SC62V/FA-SC63V
high gain antennas
FA-SC62V: 150–160 MHz
FA-SC63V: 155–165 MHz
D
OTHERS
• AD-118
acc adapter
Allows you to connect an accessory which uses a HIROSE
plug. See the instruction sheet of the AD-118 for details of the
recommended accessories.
CAUTION: The AD-118 does not have any waterproof
protection. When it is connected, NEVER expose the adaptor
and the transceiver to rain, snow or any liquids.
• HM-184/HM-184H
speaker microphone
Rugged type speaker microphone.
The HM-184 and HM-184H meet IP67 requirements for
waterproof protection.
• MB-130
vehicle charger bracket
Vehicle mounting bracket for the BC-160 battery charger.
Approved Icom optional equipment is designed for optimal performance when
used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an Icom transceiver in
the event the Icom transceiver is used with equipment that is not manufactured
or approved by Icom.
Some options may not be available in some countries. Please ask your dealer
for details.
– 3 –

Advertisement

loading

This manual is also suitable for:

Ic-f4262d series