Dsr (Triangulation) Configuration Example - Avaya P333R-LB Installation And Configuration Manual

DSR (Triangulation) Configuration Example

Note: The following example uses sample IP addresses for illustration only.
Figure 14.10 illustrates an SLB Triangulation configuration.
Figure 14.10 SLB Triangulation Configuration Example
WAN
Note:
1. The VIP should be configured in the Real Servers as a "loopback" IP address.
2. Another router (like the P333R) may be configured as the default gateway of the
Real Servers. This conserves resources and bandwidth on the P333R-LB that is
tasked with balancing client requests.
The following configuration file is a result of configuring your network as shown in
Figure 14.10:
hostname "P333R-LB"
!
interface "2"
ip vlan name "Default"
ip address 10.1.1.10
!
interface "1"
ip vlan name "Default"
ip address 193.170.1.1
!
ip default-gateway 193.170.1.2
Avaya P333R-LB User's Guide
Chapter 14
193.170.1.2 193.170.1.1
P333R-LB
Edge Router
VIP=193.170.1.3
255.255.255.0
255.255.255.0
Load Balancing in the P333R-LB
Server
10.1.1.10
Server
Server
RSG
P333R
server-group
1 low
Real Server 1
10.1.1.1
Real Server 2
10.1.1.2
Real Server 3
10.1.1.3
35