Configuration Example - Using Md5; Figure 4: Md5 Authentication - Avaya 8600 Engineering

Configuration Example – Using MD5
6.3
Assuming we wish to enable MD5 authentication between PP8600A and PP8600B, the commands are as
follows:
Step 1 Configure PP8600A
config ip ospf interface 10.1.1.1 add-
message-digest-key 1 md5-key qwsdf89
config ip ospf interface 10.1.1.1
authentication-type message-digest
Step 2 Configure PP8600B
config ip ospf interface 10.1.1.2 add-
message-digest-key 1 md5-key qwsdf89
config ip ospf interface 10.1.1.2
authentication-type message-digest
November 2010

Figure 4: MD5 Authentication

ERS 8600 / 8800 OSPF Technical Configuration Guide
These commands enable md5 authentication for ospf
interface 10.1.1.1 using key „qwsdf89‟.
These commands enable md5 authentication for ospf
interface 10.1.1.2 using key „qwsdf89‟.
avaya.com
15