Miele FNS37492iE Operating And Installation Instructions page 74

Changing the door hinging
^ Remove the screws d completely.
^ Place the mounting bracket g on the
opposite side and loosely screw in
the screws d.
^ Remove screws e completely and
loosely screw them in on the opposite
side.
^ If you had inserted pins into the
hinges to limit the door's opening
angle: remove the pins upwards out
of the hinges.
74
Unscrew the door closing dampers
Attention! When removed from the
unit, the soft-close mechanism
snaps shut. Risk of injury!
^ Place the door with the outer side
downwards on a stable surface.
^ Remove the soft-close mechanism h
from the ball joint.
^ Unscrew the mount i and pull the
soft-close mechanism h towards you
to remove it.
^ Using a screwdriver, remove the ball
joint j and screw it into the adjacent
hole.