Turning The Ice Cube Maker On/Off; Making A Large Amount Of Ice Cubes - Miele FNS37492iE Operating And Installation Instructions

Making ice cubes
Turning the ice cube maker
On/Off
^ Touch the settings button.
All symbols available for selection will
appear in the display and the 0 symbol
flashes.
^ Touch the buttons for setting the
temperature (X or Y) repeatedly until
the symbol for the ice cube maker ®
flashes in the display.
^ Touch the OK button to confirm your
selection.
^ Touch the X and Y buttons to set the
ice cube maker:
0: Ice cube maker is turned off
1: Ice cube maker is turned on
^ Touch the OK button to confirm your
selection.
The selected setting will be adopted.
^ Touch the settings button to leave
settings mode,
or
^ close the appliance door.
The electronics will otherwise switch to
normal operation after one minute.
34
Make only the number of ice cubes
required in your household with the
ice cube maker.
The drawer must be completely shut
for ice cubes to be produced.
After the appliance is turned on for
the first time it can take up to 24
hours for the first ice cubes to drop
out of the ice cube maker and collect
in the drawer.
Thereafter, when the ice cube maker
is turned off and then on again it will
take up to a maximum of 6 hours for
ice cubes to be produced.
The ice cube maker can be turned off
independently of the freezer section if
you do not want the appliance to
make any ice cubes.
If the ice cube maker is turned off,
the ice cube drawer can be used as
an extra drawer for freezing fresh
food and storing frozen food.

Making a large amount of ice cubes

The amount of ice cubes which the
appliance makes depends on the
temperature in the freezer section. The
lower the temperature, the more ice
cubes are produced within a certain
time frame. At a temperature of 0°F
(-18°C), approx. 2 lbs (1 kg) of ice
cubes will be produced within 24 hours.
Ice cube production is halted
automatically as soon as the ice cube
drawer is full.