^ Touch the settings button.
All symbols available for selection will
appear in the display and the 0 symbol
flashes.
^ Touch the buttons for setting the
temperature (X or Y) repeatedly until
the symbol for the ice cube maker ®
flashes in the display.
^ Touch the OK button to confirm your
selection.
^ The required setting can be selected
by touching the X and Y buttons:
0: Ice cube maker is turned off
1: Ice cube maker is turned on
2: Set the water quantity
3: Set cleaning position for the ice
cube tray
4: Rinse the ice cube maker
^ Touch the OK button to confirm your
selection.
The selected setting is saved and you
will hear the ice cube tray moving into a
slanted position.
^ Wait until the rotation has stopped
before continuing.
The ice cube maker will then switch off.
The symbol for the ice cube maker ®
will disappear from the display.
^ Remove and clean the ice cube
drawer.
The ice cube tray is not removable
and can only be cleaned when in
place.
^ Clean the ice cube tray b.
As soon as the ice cube maker is
turned on, the ice cube tray rotates
back to its original position.
Cleaning
41