Miele FNS37492iE Operating And Installation Instructions page 63

The water connection can be found at
the back of the appliance. The solenoid
valve b has a 3/4" connection thread.
The connection parts included with the
appliance permit the connection of
various water lines (a water line is not
included in delivery).
^ Remove the cap a from the solenoid
valve b.
^ Insert the adapter c into the union
nut d.
,
In the following, please note:
inserting the water filter incorrectly
can cause damage!
^ Place the water filter e on top of the
adapter e as shown in the picture.
,
Do not over-tighten the union
nut, damage can result!
^ Connect the union nut d to the
solenoid valve b and tighten it.
^ If you want to divert the water line by
90°, screw on the elbow f.
In case of a water line with a 1/4"
thread:
^ Connect the water line g (e.g.,
copper) using the clamping ring h
and the nut i on the adapter c or
elbow f.
In case of a water line with a 7/16"
24-UNS thread:
^ Connect the water line g directly to
the adapter c or elbow f (a
clamping ring h and nut i are not
required).
Plumbing
63