Batch Scanning - Penpower WorldCard Series User Manual

3-4 WorldCard
4. In the Scanner Panel area, please select:
- Auto scanning if you want the scan to automatically start when the card is inserted.
- Auto recognition after scanning if you want the card information to be automatically
added to your file. If you want to preview the scanned card image before recognition,
do not select this. If you select Double-sided, you can click Skip back side to scan
the front side only.
- Editing business card after scanning to display the Edit window when closing the
Scan Wizard.
5. After you recognize the card, the information will automatically go into the Unfiled category.

3.2.3 Batch Scanning

To batch-scan business cards, please select
Batch Scan
With this command, you can scan many
cards easily, preview them, and then add them
to your Card File.
1. Select single
the languages of each side.
Note: Only cards (single-sided or double
sided) that have the same languages
chosen for each card can be batch-
scanned.
Scan status pane
2. The
the scanner. Select
want the card be automatically scanned
once it is inserted. If the card does not scan
properly, click
want to return to the previous screen, click
Previous.
3. This screen allows you to quickly recognize
all the cards scanned during this batch.
When you are done, click Finish.
from the toolbar.
or double-sided. Next, select
displays the status of
Auto scanning
Rescan
to try again. If you
if you