Connecting Hardware; Preparation For Card Scanning; Calibration - Penpower WorldCard Series User Manual

2-4 WorldCard

2.2.4 Connecting Hardware

After installing the software, connect the USB connection of your WorldCard scanner or
business card camera to the USB port of your computer.
Note: Some computers may shut down accidentally after connection. This is due to lack of
power to support several USB devices. To avoid this problem, connect your World-
Card scanner/business card camera and other USB devices to an extra-powered
USB hub.

2.3 Preparation for Card Scanning

2.3.1 Calibration

After installing the software and driver, your WorldCard scanner must be calibrated in
order to ensure perfect scanning results.
To calibrate the WorldCard Color and WorldCard Office scanner, please insert the blank
side of the card facing down. The WorldCard Ultra plus color scanner doesn't need initial
calibration, but if there is any color indifference, please insert the blank side of the card fac-
ing up to calibrate it. In case the calibration card is lost, please use any same size white card
for calibration.
Tip: If there is any color indifference after scanning a card, you can calibrate the scanner
by clicking Calibration on the Tool menu.