Fujitsu fi-5220C Cleaning Instructions page 2

PFU Imaging Solutions Europe Ltd
Pad Assy
Feed Rollers
Turn the Scanner
Feed Rollers x 2
Clean lightly while rotating with your finger. Take care not to roughen the surface.
Send to" Button
"
Pick Roller
ON while cleaning the following locations
Using F1 Impregnated Cleaning Wipes
Open the ADF
showing "1" through "9".
Simultaneously hold down the "Send to" and "Scan"
buttons on the operator panel. The Feed Rollers will
start to rotate slowly.
Hold the cleaning wipe against the surface of the rotating
rollers, lightly cleaning the surface.
As a guideline, 7 presses of the "Send to" and "Scan"
Scan" Button
buttons make the rollers rotate one full turn.
"
F o r f u r t h e r i n f o r m a t i o n p l e a s e r e f e r t o t h e
f i - 5 2 2 0 C S c a n n e r O p e r a t o r s G u i d e
W h i c h ca n b e f o u n d o n o u r W e b si t e :
h t t p: / /w w w . f uj i t s u . c o m / e m e a / p r o d u c t s /
only if the Function Number Display is
J a n u a r y 2 0 1 0
Cleaning Instructions for fi-5220C Scanner
Plastic Rollers
Glass