Operation Of The Monitor - Fujitsu 4312 FA Operating Manual

Colour monitor 4312 FA
If your system unit has two monitor ports ("onboard" screen controller and separate
i
graphics card), the monitor port for the separate graphics card is usually active.
Ê
Plug the power adapter cable into the power connector (3) of the monitor. Ensure that it snaps
firmly in place.
Ê
Connect the female receptacle of the power cable supplied to the power adapter (4). Ensure
that it snaps firmly in place.
Ê
Connect the male receptacle of the power cable supplied to the monitor socket of the system
unit (5). Ensure that it snaps firmly in place.
Ê
Plug the power connector of the system unit into a properly grounded mains outlet.
When you start working with your monitor for the first time you should install the
i
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.

Operation of the monitor

1 = Power button
10 - English
AUTO EXIT
A
B
2 = Power indicator
MENU
1
2
S26361-K841-V150-1-5E19