Fujitsu 4312 FA Operating Manual page 23

Adjusting the vertical position
Calling the Position setting window
Shifting the picture down
Shifting the picture up
Activating the factory settings
Factory settings are available for Image Lock, picture position and colours in the preset operating
modes (see table in the chapter
Calling the Reset setting window
Geometry Reset
- NO YES +
Color Reset
- NO YES +
If you press down the EXIT button for about 5 seconds, all the settings will be reset to
!
factory settings!
You can use this function when you connect your monitor to another PC or to another
monitor controller (graphics card). The monitor then carries out the Auto adjustment feature
for each new mode.
Setting colour ratios
Calling the Color Temperature setting window
K
User Adjusted... Setting user-defined colours:
With the submenus R (Red), G (Green) and B (Blue) you can increase or decrease
the corresponding colour ratios (Red, Green, Blue).
Selecting reddish colour setting
Reddish
Selecting bluish colour setting
Bluish
S26361-K841-V150-1-5E19
"Technical
- = The user settings for picture definition and picture position are retained.
+ = The factory settings are activated.
- = The user settings for the colours are retained.
+ = The factory settings are activated.
data".
Colour monitor 4312 FA
English - 15