Rear Panel - Inter-m PA-2312 Operation Manual

Rear Panel

Rear Panel
1
4
1. C INPUT POWER
Connect the supplied standard C input cable here.
2. SPE KER OUTPUT TERMIN LS
These terminals are provided for connecting speakers to the unit. Make certain the combined impedance of
the speakers is equal to or higher than the rated output impedance of the amplifier.
The impedance and output voltage are as follows.
•US /C N D & ssociated Version
Impedance
Output Voltage
3. F N VENTS
These vents provide hot air flow out of the unit. It is important to keep them free of obstructions, to prevent the
unit from overheating. It is also important to operate the unit in a dust-free environment.
4. C FUSE HOLDER
This holder contains the
same type and rating.
If the fuse continues to blow, please refer servicing to qualified service personnel.
5. HIGH-P SS FILTER SWITCH
This switch activates the high-pass filter circuit, which reduces excessive low frequency content to protect
speakers and components.
2
5 6
4 5.2 41
22V 25V 70V
C overload protection fuse. If the fuse has blown out, replace it with a fuse of the
PUBLIC DDRESS 2 CH POWER MPLIFIER
7 8
•EC & ssociated, J P N Version
Impedance
Output Voltage
3
4 41 83
22V 70V 100V
5
P -2312