Side - D-Link mydlink DCH-S160 User Manual

Section 1 - Product Overview
1 Status LED
2 WPS Button
3 Reset Button
D-Link DCH-S160 User Manual
Hardware Overview
Solid Green
Blinking Green (slow)
Blinking Orange
Solid Red
Blinking Red
Light Off
Pressing the WPS button for 1 second allows you to connect with Wi-Fi clients using Wi-Fi Protected Setup
Pressing the reset button for 5 seconds will reset the DCH-S160 to the factory default settings

Side

1
2
3
The device is connected to the network
WPS is working
The device is not connected to the network
The device is powering on or the firmware is being upgraded
Water has been detected by the sensor
The device is powered off
5