Download Print this page

Advertisement

Version 2.00| 12/29/2015
User Manual
mydlink™ Wi-Fi Motion Sensor
DCH-S150

Advertisement

   Related Manuals for D-Link mydlink DCH-S150

   Summary of Contents for D-Link mydlink DCH-S150

  • Page 1: User Manual

    Version 2.00| 12/29/2015 User Manual mydlink™ Wi-Fi Motion Sensor DCH-S150...

  • Page 2: Preface

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 1.12 October 27, 2015 • Initial Release 2.00...

  • Page 3: Table Of Contents

    Introduction ................... 3 WPS Button ...................17 Hardware Overview ..............4 Troubleshooting ..............18 Front/Top ................. 4 Side and Bottom ..............5 Technical Specifications ..........19 Wireless Installation Factors ............. 6 Regulatory Information ..........20 Setting Up Your Device ............... 7 D-Link DCH-S150 User Manual...

  • Page 4: Product Overview

    Section 1 - Product Overview Product Overview Package Contents DCH-S150 mydlink™ Wi-Fi Motion Sensor Quick Install Card Quick Install Card If any of the above items are missing from your package, please contact your reseller. D-Link DCH-S150 User Manual...

  • Page 5: System Requirements

    Mobile Requirements • iPhone, iPad, or Android smartphone or tablet • For mydlink and mydlink app requirements mydlink Requirements refer to: http://www.mydlink.com Please refer to the mobile app’s store page to check whether your device is compatible. D-Link DCH-S150 User Manual...

  • Page 6: Introduction

    Through its easy-to-use mydlink™ Home app, you can quickly and easily connect the DCH-S150 to an existing network. The setup wizard will even guide you through the setup process, so you can get your home automation devices up and running in no time. D-Link DCH-S150 User Manual...

  • Page 7: Hardware Overview

    Section 1 - Product Overview Hardware Overview Front/Top Motion Sensor This sensor will detect motion and trigger actions to other devices. D-Link DCH-S150 User Manual...

  • Page 8: Side And Bottom

    Pressing the WPS button for 1 second allows you to connect with Wi-Fi clients using Wi-Fi Protected Setup Reset Button Pressing the reset button for 10 seconds will reset the DCH-S150 to the factory default settings D-Link DCH-S150 User Manual...

  • Page 9: Wireless Installation Factors

    Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DCH-S150 User Manual...

  • Page 10: Setting Up Your Device

    Add New Device, and follow the instructions. Step 4: When you are asked to scan a QR code, use the code on the Quick Install Card in your package. Congratulations, your DCH-S150 is now ready to use! D-Link DCH-S150 User Manual...

  • Page 11: Mydlink™ Home

    You can also perform a factory reset here by tapping Reset. To change the device name or associated icon, tap the name or the icon respectively, and enter the new name or use the menu to select the new icon. D-Link DCH-S150 User Manual...

  • Page 12: Schedule

    Start and End time, and Cycle (or duration) that the device will be active. This type of schedule is suited for schedules using the same Start and End times and Cycle for each day. D-Link DCH-S150 User Manual...

  • Page 13

    Tap x to delete a specific time. After the schedule is set, go back to the previous page and tick the radio button next to the rule to activate it. D-Link DCH-S150 User Manual...

  • Page 14: Information

    Displays the product model. Firmware Displays the version of the firmware. Version: MAC Address: Displays the MAC address of the device. Time Zone: Displays the time zone of the device. Factory Reset: Tap Reset to perform a factory reset. D-Link DCH-S150 User Manual...

  • Page 15: My Actions

    2. Type in a name for this action. Tap Done when you’ve finished inputting the name. 3. To select the device you want to use as the trigger for this action, tap + then choose from the list of devices. D-Link DCH-S150 User Manual...

  • Page 16

    Section 3 - Usage 4. Select from the available conditions for this device and tap Next. 5. Tap + to select from the available responders for this device. D-Link DCH-S150 User Manual...

  • Page 17

    7. Check the action settings and tap Done to finish. 8. To delete the rule, simply swipe right on the rule to show the trash icon. Tap on the icon to delete it. D-Link DCH-S150 User Manual...

  • Page 18: My Places

    Tap next to it to enter a name for the group. Then tap the + icon to add devices. 3. Tick the devices to be included in this group and tap Done. D-Link DCH-S150 User Manual...

  • Page 19

    Section 3 - Usage 4. Your group is created and will show up in My Places. Tapping each device in the group will take you to their settings. You can tap the icon to activate/deactivate the device. D-Link DCH-S150 User Manual...

  • Page 20: Connecting To A Wireless Router

    Step 2 - Within 120 seconds, press the WPS button on your wireless device. Step 3 - Allow up to 1 minute to configure. Once the LED light stops blinking and turns solid green, you will be connected and your wireless connection will be secured with WPA2. D-Link DCH-S150 User Manual...

  • Page 21: Troubleshooting

    DCH-S150 is enabled for remote access, you will be able to control it from anywhere using your iOS or Android device.* * Your motion sensor device must be connected to your home Wi-Fi network for remote access. D-Link DCH-S150 User Manual...

  • Page 22: Technical Specifications

    • Status/WPS/Motion detection Weight Operating Temperature • 80 grams (2.82 ounces) • 0 to 40 ˚C (32 to 104 ˚F) Storage Temperature • -20 to 65 ˚C (-4 to 149 ˚F) Frequency range varies depending on local regulations D-Link DCH-S150 User Manual...

  • Page 23: Regulatory Information

    Note: The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link DCH-S150 User Manual...

  • Page 24

    (ii) pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 à 5350 MHz et de 5470 à 5725 MHz doit être conforme à la limite de la p.i.r.e; D-Link DCH-S150 User Manual...

  • Page 25

    Appendix B - Regulatory Statements NCC 警語 : 以下警語適用台灣地區 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率 射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通 信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 本模組於取得認證後將依規定於模組本體標示審驗合格標籤系統廠商應於平台上標示「本產品內含射頻模 組: <CCAFXXLPXXXXTX>」字樣 無線傳輸設備 (UNII) 在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備,限於室內使用。無線資訊傳輸設備忍受合法通信之干擾且不得干擾合法通信;如造成 干擾,應立即停用,俟無干擾之虞,始得繼續使用。無線資訊傳設備的製造廠商應確保頻率穩定性,如依製造廠商使用手冊上所述正常操 作,發射的信號應維持於操作頻帶中。 電磁波曝露量MPE標準值(MPE) 1 mW/cm ,送測產品實值為 0 mW/cm D-Link DCH-S150 User Manual...

  • Page 26

    This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication between two client devices without an Access Point. • Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in 5 GHz within the EU. D-Link DCH-S150 User Manual...

  • Page 27

    Spectrum Regulation MHz, Europa (ETSI) max. EIRP Innenbereich max. EIRP Außenbereich Europa 2400 - 2483.5 MHz 100 mW 100 mW 2400 - 2454 MHz 100 mW 100 mW Frankreich 2454 - 2483.5 MHz 100 mW 10 mW D-Link DCH-S150 User Manual...

  • Page 28

    D-Link hereby, declares that this <###> is in compliance with the essential requirements and other relevant English provisions of Directive 1999/5/EC. Por medio de la presente D-Link declara que el <###> cumple con los requisitos esenciales y cualesquiera otras Español [Spanish] disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

  • Page 29

    Português [Portuguese] 1999/5/CE. Slovensko [Slovenian] D-Link izjavlja, da je ta <###> v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] D-Link týmto vyhlasuje, že <###> spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. D-Link vakuuttaa täten että <###> tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä...

  • Page 30

    D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.

  • Page 31

    D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.

  • Page 32

    D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.

  • Page 33

    D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.

  • Page 34

    D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.

  • Page 35

    D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.

  • Page 36

    D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.

Comments to this Manuals

Symbols: 0
Latest comments: