Section 1 - Product Overview
1
LED
2
WPS Button
3
Reset Button
D-Link DCH-S150 User Manual
Hardware Overview
Side and Bottom
Solid Green
Blinking Green (slow)
Blinking Green (fast)
Blinking Orange
Solid Red
Light Off
Pressing the WPS button for 1 second allows you to connect with Wi-Fi clients using Wi-Fi Protected Setup
Pressing the reset button for 10 seconds will reset the DCH-S150 to the factory default settings
1
2
3
The device is connected to the network
WPS is working
PIR is detecting motion
The device is not connected to the network
• The device is powering on
• The firmware is being upgraded
• The device is defective
The device is powered off
5