Specifications - Aiwa NSX-MT960 Service Manual

SPECIFICATIONS
<FM Tuner section>
Tuning range
Usable sensitivity(lHF)
Antenna terminals
cMW Tuner section>
Tuning range
Usable sensitivity
Antenna
<Amplifier section>
Power output
Total harmonic distortion
Inputs
outputs
<Cassette deck section>
Track format
Frequency response
Signal-to-noiee ratio
Recording system
Heads
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
531 kHz to 1602 kHz (9 kHz step)
530 kHz to 1710 kHz (1 O kHz step)
350 uV/m
Loop antenna
Front
U:145W+ 145 W(50Hz-20kHz,
T.H.D. less than 1%,6 ohms)
LH:170W+170W(lkHz,
T. H.D.1 O%, 6 ohms)
Rear (surround)
U:33W+33W (50 Hz-20 kHz,
T.H.D, less than I%, 8 ohms)
LH :40 W + 40 W (lkHz, T.H.D.
10YO, 8 ohms)
Center
U :33 W (50
HZ -20
kHz,T.H.D.
less than 1 Y., 8 ohms)
LH :40 W (1 kHz,T.H.D. 10%,
8 ohms)
U :0.17. (130 W, 1 kHz, 6 ohms,
DIN AUDIO)
LH :0.17. (110 W, 1 kHz, 6 ohms,
DIN AUDIO/Front)
VI DEO/AUX: 210 mV(adjustable)
MD :21 OmV (adjustable)
MIC1, MIC2 : 1.4mV (10 kohms)
5.1 CH INPUT :
FRONT (L, R) :400 mV
REAR (L, R) :400 mV
CENTER :400 mV
WOOFER :400 mV
LINE OUT: 280mV
SUPER WOOFER : IV
SPEAKERS: accept speakers of
6 ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms PHONES (stereo jack) :
accepts headphones of 32 ohms
or more
4 tracks, 2 channels stereo
CrO, tape :50 Hz – 16000 Hz
Normal tape :50 Hz – 15000 Hz
60 dB (Dobly B NR ON, CrOztape
peak level)
AC bias
Deck 1: playback head x 1
Deck 2: Recording/Playback head
x I/erase head x 1
<Compact disc player section>
Laser Semiconductor laser (k =780 nm)
D-A converter 1 bit dual
Signal-to-noise ratio 83 dB (1 kHz, O dB)
Harmonic distortion 0.05 %(1 kHz, O dB)
Wow and flutter Unmeasurable
<Speaker system SX-NA952>
Cabinet type 3 way bass reflex (magnetic
shielded type)
Speakers
Woofer:
160 mm cone type
Tweeter:
80 mm ceramic type
Super tweeter:
20 mm ceramic type
Impedance 6 ohms
Output sound pressure level 87 dBAfV/m
Dimensions (W x H x D) 250 x 353x 290 mm
Weight 5.5 kg
cSpeaker system SX-NF952>
Cabinet type
3 way bass reflex (magnetic
shielded type)
Speakers Woofer:
160 mm cone type
Tweeter:
80 mm ceramic type
Super tweeter
20 mm ceramic type
Impedance 6 ohms
Output sound pressure level 87 dBfWlm
Dimensions (W x H x D) 250 x 353x 290 mm
Weight 5.5 kg
<General>
Power requirement
U:120VAC,60HZ
LH :120 V/220-230 V/240 V AC
(switchable), 50/60 Hz
Power consumption U:200W
LH :250 W
Dimensions of main unit
300 x 357.5x 376 mm
Weight 12.8 kg
Design and specifications are subject to change without
notice.
The word "BBE''and the "BBE symbol" are trademarks of BBE
Sound, Inc.
Under license from BBE Sound,lnc.
Manufactured under license from Dolby Laboratories Licensing
Corporation.
"DOLBY and "pRO LOGIC" are trademarks of Dolby Laboratories
Licensing Corporation.
6