Fujitsu Europe LImited
Turn the Scanner
Feed Rollers x 2
Clean lightly taking care not to roughen the surface.
"Send to" Button
For further information please refer to the
fi-5220C Image Scanner Operators Guide
while cleaning the following locations
Using cleaning paper moistened with F1 Cleaner
which can be found on our Website:
Cleaning Instructions for fi-5220C Flatbed Scanner
Open the ADF
only if the Function Number Display is showing "1"
Simultaneously hold down the "Send to" and "Scan"
buttons on the operator panel. The Feed Rollers will
rotate slowly each time buttons are pressed
Hold a soft dry, moistened cleaning paper against the
surface of the rotating rollers, lightly cleaning the
As a guideline, 7 presses of the "Send to" and
"Scan" buttons make the rollers rotate one full turn.