ADT Health Fall Detection Pendant User Manual page 8

To cancel the test call:
Press and hold the Emergency Help Button until it flashes green once and you

hear a series of beeps.
You can also cancel the call by pressing the blue RESET button on your Base

Station.
If you cancel the call, your Base Station says "ALARM CANCELLED" and no

alarm is sent to the emergency response center.
NOTE:
If you do not cancel the alarm during the first 20 seconds after a fall was
detected, the Base Station says "FALL DETECTED, CONTACTING EMERGENCY
RESPONSE CENTER" and then "PLEASE STAND BY FOR OPERATOR." Please tell
the operator that you are testing your system. If you do not explain to the
operator that this is a test, emergency help will be dispatched.
8 ADT Health Customer Support 800.568.1216
®