Putting On The Fall Detection Pendant - ADT Health Fall Detection Pendant User Manual

Putting on the Fall Detection Pendant

Place the pendant around your neck and adjust the lanyard so that it rests at

chest level with the Emergency Help Button facing forward so that it is easier for
you to press.
Wear the pendant outside your shirt, as wearing it inside your shirt can reduce

the percentage of falls being detected.
NOTE:
 Please handle your pendant with care when putting it on or taking it off, as it
may interpret this movement as a fall and activate.
 If the pendant does sense a fall, it sounds a series of beeps and the red light
begins flashing.
 You can cancel the alarm by pressing and holding the Emergency Help Button
for approximately 5 seconds until the light flashes green once and you hear a
series of beeps.
 If you are unable to cancel, please tell the operator that it was a false alarm. If
you do not explain this to the operator, emergency help will be dispatched.
Fall Detection Pendant User Guide 5