Hunter Type 7 Series Owner's Manual And Installation Manual
Hide thumbs
Also See for Type 7 Series:
- Owner's manual and installation manual (14 pages) ,
- Installation and operation manual (14 pages) ,
- Owner's manual and installation manual (17 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42768-01
20090223
©2009 Hunter Fan Co.
Type 7 Models
Type 7 Models
Type 7 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter Type 7 Series
Summary of Contents for Hunter Type 7 Series
- Page 1 Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42768-01 20090223 ©2009 Hunter Fan Co.
-
Page 2: Table Of Contents
Fan ......13 use a solid-state speed control with this fan. Use only Hunter speed 9 •... - Page 3 Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Do not over tighten. Flat Washer 3” Wood Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. 42768-01 • 02/23/09 • Hunter Fan Company... -
Page 6: Assembling And Hanging The Fan
Once assembled, do not remove the downrod. U-shaped Hole 3-4. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim. 42768-01 • 02/23/09 • Hunter Fan Company... -
Page 7: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42768-01 • 02/23/09 • Hunter Fan Company... -
Page 8: Installing The Canopy And Canopy
2. Press firmly on opposite sides of the ring toward the canopy. The tabs will flex out releasing the trim ring from the canopy. Step 5-3 Steps 5-4 – 5-5 Canopy Screw 42768-01 • 02/23/09 • Hunter Fan Company... -
Page 9: Assembling The Blades
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Install the grommets into the blades by hand. Step 6-1 (Detail) 6-2. Place each blade between a blade iron and medallion. Install three blade screws to attach the medallion to the blade iron. -
Page 10: Completing Your Installation With A Light Fixture
7 • Completing Your Installation With a Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. The switch housing assembly is made up of three sections: the switch housing gasket, the upper switch housing, and the lower switch housing/light assembly. - Page 11 Lower Switch one keyhole slot up with the next screw to either side and try again. Keyhole Housing Slots 7-14. Tighten all lower switch housing assembly screws. 42768-01 • 02/23/09 • Hunter Fan Company...
- Page 12 7-19. If you want the pull chains to be longer, use the breakaway connectors to attach the extra chains to the installed pull chains. Pull Chain Openinig Glass Bowl Cover Plate Finial Breakaway Connector 42768-01 • 02/23/09 • Hunter Fan Company...
-
Page 13: Fan
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Reversing Pull the reversing switch chain. Restart fan. Pull Chain Switch Light Chain 42768-01 • 02/23/09 • Hunter Fan Company... -
Page 14: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. #400 Memphis, Tennessee 38016 42768-01 • 02/23/09 • Hunter Fan Company...
Need help?
Do you have a question about the Type 7 Series and is the answer not in the manual?
Questions and answers