Toshiba e-STUDIO550 Operator's Manual page 40
Hide thumbs
Also See for e-STUDIO550:
- Operator's manual (179 pages) ,
- Service manual (346 pages) ,
- Service handbook (314 pages)
Table of Contents
Advertisement
4.
Search the file to see if you have a statement similar to the following included:
SET BINDERY CONTEXT=0U=ENG
• If the statement above can be found in the file, the server has a bindery. If this is not found, enter the statement
above and save the file.
5.
Restart the NetWare file server.
Setting up the NetWare File Server
The following procedures explain how to set up a NetWare 4.x file server with bindery emulation so that
networked users can print to the GA-1140 from their workstations, and the GA-1140 can obtain print
jobs from the NetWare server.
For NetWare 4.x in emulation, the NetWare print server and print queue for GA-1140 are created and
configured from NetWare Print Console (PCONSOLE), a NetWare utility that is stored in NetWare's
PUBLIC directory.
1.
Start PCONSOLE at the DOS prompt on the workstation.
2.
Select Print Queue from the Available Options menu and press the Enter key.
• The Print Queues window appears.
3.
Press the Insert key and enter the print queue name and press the Enter key.
• The queues on the NetWare server must be named to match the Direct connection and the Print, and Hold queues on
the GA-1140. The NetWare queue names should be given an extension corresponding to the GA-1140 print
connection, as follows:
_print
_hold
_direct
NOTE:
More than one GA-1140 print connection is published (for example, if both the Print queue and the Hold queue are
published), you may wish to create a queue for each print connection so that you and other users can print to each
connection directly.
:
The Hold queue and Print queue are only available when the PS3 Scan & HDD Upgrade (GE-1060+GE-1110) is
installed.
4.
Press the Esc key to close the Print Queues window.
5.
Select Print Server from the Available Options menu and press the Enter key.
6.
When the message is displayed, press the Enter key.
• The Print Servers window appears.
7.
Press the Insert key and enter a print server name and press the Enter key.
8.
Select created print server name from the Print Servers window and press the Enter key.
• The Print Server Information menu appears.
9.
Select Printers from the Print Server Information menu and press the Enter key.
• The Defined Printers window appears.
38
Advertisement
Table of Contents
Troubleshooting
