Configuring A Netware 4.X Server With Nds - Toshiba e-STUDIO550 Operator's Manual

Configuring a NetWare 4.x Server with NDS

The following procedures explain how to set up a NetWare file server with NDS so that networked
users can print to the GA-1140 from their workstations, and the GA-1140 can obtain print jobs from the
NetWare server. More detail is provided in your NetWare documentation.
1. In NetWare Administrator, select the container object to create the printer and click the Object
menu and select the Create command.
• The New Object dialog box appears.
2. In the Class of new object list, select Print Queue and click OK.
• The Create Print Queue dialog box appears.
3. Select Directory Service Queue and enter the name of print queue in the Print Queue name field.
• The queues on the NetWare server must be named to match the Direct connection and the Print, and Hold queues on
the GA-1140. The NetWare queue names should be given an extension corresponding to the GA-1140 print
connection, as follows:
_print
_hold
_direct
NOTE:
More than one GA-1140 print connection is published (for example, if both the Print queue and the Hold queue are
published), you may wish to create a queue for each print connection so that you and other users can print to each
connection directly.
: The Hold queue and Print queue are only available when the PS3 Scan & HDD Upgrade (GE-1060+GE-1110) is
installed.
4. Click the browse button at the next to the Print Queue Volume field.
• The Select Object dialog box appears.
5. Select the volume to create a print queue and click OK.
6. Click Create.
7. Click the Object menu and select the Create command.
• The New Object dialog box appears.
8. In the Class of new object list, select Printer and click OK.
• The Create Printer dialog box appears.
9. Enter the printer name and check the Define additional properties option and click Create.
10. View the Assignments window and click Add.
• The Select Object dialog box appears.
11. Select a created queue and click OK.
12. View the Configuration window and select Other/Unknown at the Printer Type drop down box and
click OK.
13. Click the Object menu and select the Create command.
• The New Object dialog box appears.
36