Options | Advanced - Optoma X402 Manual

User Controls
The value of
™
sleep timer will
be reset to zero
after the projector
power off.
The projector
™
will automatically
power of when
the countdown
has finished. The
default setting is
20 minutes.
58
English
OPTIONS |
Advanced
Direct Power On
Choose "On" to activate Direct Power mode. The projector will
automatically power on when AC power is supplied, without
pressing the " " key on the projector Keypad or on the remote
control.
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start,
when there is no signal being sent to the projector. The projector
will automatically power off when the countdown has finished (in
minutes).
Sleep Timer (min)
Sets the countdown timer interval. The countdown timer will start,
with or without a signal being sent to the projector. The projector
will automatically power off when the countdown has finished (in
minutes).
Quick Resume
On: If the projector is accidentally turned off, this feature allows
`
the projector to be instantly powered on again, if selected
within a period of 100 seconds.
Off: The fan will start cooling the system after 10 seconds
`
when user turns off the projector.
Power Mode (Standby)
Eco.: Choose "Eco." to save power dissipation further < 0.5W.
`
Active: Without Signal Power On enable, choose "Active" to
`
return to network standby, the VGA out port will be enabled
and power consumption will be <6.0 W.
Exit
Choose "Exit" to exit the menu.