Options | Advanced - Optoma EH415ST User Manual

Direct Power On
Enable or disable Direct Power On.
On—the projector powers on automatically when AC power is

supplied.
Off— the projector must be powered on as normal.

Signal Power On
Enable or disable Signal Power On.
On—the projector powers on automatically when an active

signal is detected.
Off— disable the power on trigger by active signal is detected.

1. Only available on Standby Mode is Active.
N N
ote ote
2. If projector is turned off with keeping input the signal source
(the last image source showing on screen), it will not re-start
unless:
a. Terminate the last image source and input any signal source
again.
b. Unplug and re-plug the projector power again.
3. Signal power on will ignore "source lock" setting.
User Controls

Options | Advanced

49