Options | Lamp Settings - Optoma X402 Manual

Lamp Settings
When ambient
™
temperature is
over 40 C in
operating, the
projector will
switch to Eco
automatically.
"Lamp Mode" can
™
be independently
set for 2D and 3D.
Dynamic mode-
™
lamp power can
be dynamically
adjusted from
100% to 30%.
OPTIONS |
Lamp Hours
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning message
when the changing lamp message is displayed.
The message will appear 30 hours before suggested replacement
of lamp.
Lamp Mode
Bright: Choose "Bright" to increase the brightness.
`
Eco.: Choose "Eco." to dim the projector lamp which will lower
`
power consumption and extend the lamp life.
Dynamic: Choose "Dynamic" to dim the lamp power which will
`
be based on brightness level of the content and adjust lamp
power consumption between 100% and 30% dynamically. The
lamp life will be extended.
Eco+: When Eco+ mode is activated, the brightness level of
`
the content is automatically detected to significantly reduced
lamp power consumption (up to 70%) during periods of
inactivity.
Lamp Reset
Resets the lamp hour counter after replacing the lamp.
Exit
Choose "Exit" to exit the menu.
User Controls
55
English