Reboot; Use Keypad Configure At-510 Ip Phone; Keypad Function - Gigaset AT-510 User Manual

AT-510 IP phone user manual
4.13、 Reboot
Reboot IP phone, some setting needs to reboot to make it works. Please always save config
before reboot, otherwise the setting will return to previous setting.
III、 Use keypad configure AT-510 IP
phone

Keypad function

1.
User can configure AT-510 through its keypad. List below is the keypad function
Keypad Mode
Idle mode ----
info Idle mode
Menu/OK Idle mode
config mode
Exit config mode
Up Calling mode
config mode
Down Calling mode
config mode
Del Calling mode
config mode
Mute Calling mode
Function/Display
show current time
circularly show phone number,wan ip, gateway info
enter config mode, default password 123
confirm or enter sub-menu
exit
volume up (Max:9)
Page up
volume down (Min:1)
Page down
Delete digits
Delete digits
Mute
26 / 31