Gigaset AT-510 User Manual page 11

AT-510 IP phone user manual
Account Name：SIP account name
Phone Number：SIP account phone number, if leave it as blank , no registration information
will be sent out
Display Name：show the display name that you want to display on the phone of callee.
Support number and letter input
Proxy Server Address：Normally the Proxy server is the same as SIP server. If they are
different then fill in the correct information that provided by ISP
Proxy Server Port:
Proxy Username:
Proxy Password:
Domain Realm: config SIP local domain. If the server does not have a special requirements
for the local domain of SIP terminal , the local domain can be the same as SIP server domain.
The user can also leave it as blank , the system will take SIP server domain as the demain
realm.
Enable Register: Enable or disable registration
Advanced SIP setting
Register Expire Time: register expire time, default is 600 seconds. AT-510 will auto
configure this expire time to the server recommended setting if it is different from the SIP
server.
NAT Keep Alive Interval: Co-work with the Auto Detect Server, if Auto Detect Server is
enable, AT-510 will periodically detect if the SIP server is available according this setting.
User Agent::
Signal Key: Signal encryption Key:
Media Key: voice stream encryption Key
Local Port: Local SIP signal port，default as 5060
11 / 31