AT-510 IP phone user manual
Advance
4.
4.1、 Stun
STUN NAT Transverse:STUN NAT Transverse status true or false
STUN Server Addr:
STUN Server Port:
STUN Effect Time:
a certain time , it will close the link so you need to send a packet within a interval tome to
keep the link alive
Local SIP Port: config local SIP port , default as 5060Use Stun:enable/disable SIP STUN
Attention:SIP STUN is used for NAT transverse. When you config STUN server's
addressand port (default 3478) and enable it, then you can use the normal SIP server to make
the IP phone transverse NAT
configure stun server address;
configure stun server port default 3478
stun detect NAT type interval time .If NAT found a link inactive for
14 / 31