Download  Print this page

Gigaset A120 User Manual

Hide thumbs

Advertisement

Gigaset A120 english
Handset A12
1 Charge status of the
battery pack
2 Internal number of the
handset
3 Display keys
4 Directory key
5 Talk key
6 End call and
On/Off key
7 Ringer on/off
(long press)
8 Keypad lock
9 Recall key
- Confer (Flash)
- Dial pause
(long press)
10 Microphone
11 Speed dial list key

Safety precautions

Read this manual and the safety precautions care-
W
fully before use. Explain their contents to your
children, and the potential hazards associated
with using the telephone.
Only use the mains unit supplied.
$
Fit only the approved rechargeable battery
pack! Never use a conventional (non-recharge-
able) battery pack as this could damage your
health and cause injury. Use the battery pack as
directed in these instructions (page 6).
The operation of medical appliances may be
affected. Be aware of the technical conditions
within the particular environment (e.g. doctor's
practice).
The handset may cause an intrusive 'hum' in
hearing aids. Do not hold the handset against
your ear while it is ringing (incoming call).
1
1
2
22-35
Þ Ü
INT MENU
3
4
5
6
7
8
9
10
11
1
Base
V
Register/Paging key
(page 4/page 5)
Display keys:
Pressing the keys launches whichever function
that appears above them in the display.
Display
icon
Þ
Ü
INT
MENU
t
s
and
u
v
and
ß
OK
Do not install the phone in a bathroom or
shower room as the handset and base are not
splash-proof. (page 7)
Do not use the telephone in environments
subject to explosion hazard (e.g. auto paint
shops).
If you give your Gigaset to someone else, make
ƒ
sure you also give them the operating manual.
Dispose of the battery pack and telephone in
accordance with environmental regulations.
Do not pollute the environment. Emergency numbers can-
not be dialled if the keypad lock (page 2) is activated!
Not all of the functions described in this manual are avail-
able in all countries.
Meaning when pressed
Open the last number redial list
(page 3).
Open the calls or network mailbox
list (page 4).
Open the list of registered hand-
sets (page 5).
Open main menu/submenu.
Scroll up/down, or adjust volume.
Move cursor to the left/right.
Backspace deletes one character at
a time.
Confirm menu function or store an
entry.

Advertisement

loading

  Also See for Gigaset A120

  Summary of Contents for Gigaset A120

  • Page 1: Safety Precautions

    (e.g. auto paint with using the telephone. shops). Only use the mains unit supplied. If you give your Gigaset to someone else, make ƒ sure you also give them the operating manual. Fit only the approved rechargeable battery...
  • Page 2: Setting Up The Telephone For Use

    Setting up the telephone for use Step 3: Registering the handset to the base and charging the battery pack Step 1: Connecting the base Place your handset in the base with the display facing forwards. The handset will now register automatically to the base.
  • Page 3: Calling Line Identification

    Answering a call Storing a number in the directory/speed dial list ¢ ¢ MENU NEW ENTRY Your handset rings and you wish to take the call: Enter phone number and confirm. Press the talk key If "Auto Answer" is active (page 5) just lift the Directory: Enter name and confirm.
  • Page 4: Registering And De-Registering Handsets

    Calls list: The number of the last 30 missed calls station. are stored. A Gigaset A12 handset that is not yet registered on When the phone is in idle status, new missed calls a base is registered automatically. Other handsets are indicated by a flashing Û...
  • Page 5: Using Several Handsets

    Using several handsets If one of the internal parties presses the end call , a signal tone sounds. This does not affect the connection between the other handset and the Internal calls external caller. Internal calls are no-cost calls to other handsets Looking for a handset ("paging") that are registered to the same base.
  • Page 6: Specifications

    Resetting the handset Specifications Restoring the factory settings of the handset will Power consumption not affect entries in the directory, the calls list or In ready status: approx. 2 Watt. During charging: the speed dial list or the handset's registration to approx.
  • Page 7: Questions And Answers

    Care Questions and answers Wipe the base station and handset with a damp If you have any queries about the use of your tele- cloth or an antistatic wipe. Never use a dry cloth! phone, go to This can cause static! www.siemens.com/gigasetcustomercare for assistance 24/7.
  • Page 8: Service (Customer Care)

    Service (Customer Care) You can get assistance easily when you have technical questions or questions about how to use your device by using our online support service on the Internet at: www.siemens.com/customercare This site can be accessed at any time wherever you are. It will give you 24/7 support for all our products. It also provides interactive troubleshooting, a list of FAQs and answers plus user guides for you to download.
  • Page 9: Excerpt From The Original Declaration

    Authorisation Your Gigaset is intended for operation in your country, as depicted on the underside of the base station and the packaging. Country-specific condi- tions have been taken into account. The CE mark certifies conformity of the device with the essential requirements of the R&TTE directive.
  • Page 10: Menu Tree

    Menu tree Your phone has an extensive range of features. To return to idle status: press key long. These are offered in the form of menus. There are two ways in which you can access a func- tion: With the phone in the idle status, press MENU ◆...