Starting / Stopping The Engine - Stihl HT 100 Instruction Manual

English / USA
Starting / Stopping the
Engine
7
3
2
1
Controls
1 Throttle trigger interlock
2 Throttle trigger
3 Slide control
Positions of slide control
: STOP – $ (4) – engine off – the
ignition is switched off.
: # – normal run position (5) – the
engine is running or can start.
:
START (6) – the ignition is switched
on – the engine can start.
26
Symbol on slide control
: h (7) – stop symbol and arrow. To
4
stop the engine, move the slide
control in direction of arrow (h) to
STOP – $
5
Starting
6
:
Hold down the throttle trigger
interlock and squeeze the throttle
trigger.
:
Keep both levers in that position.
:
Move the slide control to START.
and hold it there.
:
Now release the throttle trigger,
slide control and throttle trigger
interlock in that order. This is the
starting throttle position.
9
8
:
Set the choke knob (8):
For cold start to: g
Form warm start to: e
also use this setting if the engine
has been running but is still cold
:
Press fuel pump bulb (9) at least
5 times – even if bulb is filled with
fuel.
HT 100, HT 101, HT 130, HT 131