Renesas R0K572167 User Manual page 61

3
The following table lists the PHY operating mode settings.
No. Setting
SW2-1 OFF
ISOLATE
ON
SW2-2 OFF
RPTR
ON
SW2-3 OFF
SPEED
ON
SW2-4 OFF
DUPLEX
ON
SW2-5 OFF
ANE
ON
SW2-6 OFF
LDPS ON
Notes:
1. Default setting.
2. Do not change SW2 settings while the board is ON. Be sure to turn the power OFF before changing the
settings.
The following table lists the LEDs.
Number Color
LED1 Yellow
LED2 Yellow
LED3 Yellow
LED4 Yellow
LED5 Yellow
LED6 Blue
LED7 Green
LED8 Green
LED9 Green
LED10 Green
LED11 Green
LED12 Green
Rev. 0.02 Mar. 27, 2009
REJ11J0038-0002
Table 3.2.8 PHY Operating Mode Setting
ISOLATE is high
(1)
ISOLATE is low
RPTR is high
(1)
RPTR is low
(1)
SPEED is high
SPEED is low
(1)
DUPLEX is high
DUPLEX is low
(1)
ANE is high
ANE is low
LDPS is high
(1)
LDPS is low
Table 3.2.9 LEDs
PHY-LSI LED (LED_A)
PHY-LSI LED (LED_B)
PHY-LSI LED (LED_C)
PHY-LSI LED (LED_D)
PHY-LSI LED (LED_E)
Power supply LED (LED6 is illuminated when power is supplied)
User LED (LED 7 is illuminated when PE9 outputs a high-level signal)
User LED (LED 8 is illuminated when PE11 outputs a high-level signal)
User LED (LED 9 is illuminated when PE12 outputs a high-level signal)
User LED (LED 10 is illuminated when PE13 outputs a high-level signal)
User LED (LED 11 is illuminated when PE14 outputs a high-level signal)
User LED (LED 12 is illuminated when PE15 outputs a high-level signal)
Description
Description/Remarks
Operating Specifications
3.2.5 Switches and LEDs
PHY mode setting
3-29