Table of Contents
Advertisement
6.8.1
Switch configuration
To have a switch really control a channel on the
Digital DC 10x10A, you need to perform the event
configuration. Figure 17 shows how to let the switch
called "Kitchen" control channel 6 of the Digital DC.
Now, Kitchen on the Favourites page (see figure 19)
toggle switches channel 6.
6.8.2
Feedback configuration
Only switches of the MasterView Easy itself can
show feedback information on its Favourites page.
See figure 18. For instance Kitchen is Event
configured to toggle switch channel 6 of the Digital
DC 10x10A. The Digital DC can be Event configured
to send a feedback signal to Kitchen if it is really
switched On. The "LED" in Kitchen then turns black,
see figure 19. In case of alarm, it blinks.
NOTE: Only the MasterView Easy MkII
switches can be configured for the Easy
MkII feedback function!
Figure 17: Switch configuration at the MasterView Easy MkII
Figure 18: Feedback configuration at the Digital DC 10x10A
Kitchen
Figure 19: Favourites page with switch. The
circle in the switch functions like a feedback
6.9
TANKLEVEL INTERFACE
The MasterView Easy MkII features three Favourites
page display options for the Tanklevel Interface, see
figure 20. Select 3 tank levels and after that, add the
group and item to the areas (see section 6.6.8).
EN / MasterView Easy MkII / September 2010
Figure 16: Configuration, monitoring of switch 1-6
Figure 20: Tank levels configuration and displays
MONITORING AND CONFIGURATION
Favourites
X
50%
0% 100%
17
Hide quick links:
Advertisement
Table of Contents
