Masterview Easy Configuration; Changing Of Characters - Mastervolt MasterView Easy MkII User Manual

6.2

MASTERVIEW EASY CONFIGURATION

To change settings of the MasterView Easy display,
press Go To Configuration. The MasterView Easy
configuration menu is used for read out and
adjustment of settings like backlight illumination,
displayed language and number of devices.
Variable Meaning
General
Name yacht Name of the boat, the panel is installed on.
See also section 6.2.1.
Device name Name of this device. This name will be
recognized by all connected devices.
Switch X Switches to use for event configuration.
Renaming the switches after their application
is recommended. X ranges 1 – 6.
Devices in list Devices to show in the device list. At
Selection three selection boxes appear to
choose a MasterBus device connected.
Excluded means, you can select all devices
except maximum three devices.
Buzzer Switching of the buzzer.
The buzzer can also be target in the
MasterBus events, if activated it sounds for
maximum 1 minute. See also section 6.3.
This means the buzzer can sound even if
you switched it off in the configuration.
Auto Lock after Time after which to lock the panel.
Backlight Choose the backlight colour. In alarm the
backlight turns red, if not red already.
Power save
Backlight time Time the display backlight stays illuminated
since the last button was touched.
Auto off Time after which the MasterView Easy will
be switched off since the last button touch.
Backlight Percentage of illuminance
Favourites page
Name fav. page Name of your Favourites page.
Favourites page Selection of areas to show. Analogue
means, a bar is shown instead of a value.
Connect to Fav
Connect to Area to connect the next item to
Device Device to add the monitoring item from
Group no. Group number in monitoring page selected
Item no. Item number in monitoring page selected
Add Add the item to the Favourites page
In Connected favour., a list of the added monitoring items for the chosen areas is shown. This list is read only in
user level.
6.2.1

Changing of characters

Changing of characters, for instance the yacht
name, is accelerated by keeping the up/down arrow
EN / MasterView Easy MkII / September 2010
The MasterView Easy Configuration Lock
disables configuration of all connected
devices. After selection of Configuration
Enabled the Configuration Lock symbol disappears
in all configuration groups. The first configuration
group (at Easy panel: General) always remains
enabled.
Default Adjustable. range
Yacht name Maximum 16 characters
DIS MV DIS+Maximum 12 characters
Easy
Switch X Maximum 16 characters
Selection, All, Excluded
On On, Off
Off Off, 2, 5, 10 minutes
White White, Red
2 minutes always off,2 minutes,5
minutes,10minutes,always on
1 day 1 day, 2 days,
always on
50% 0-100%, in 10% steps
- Maximum 16 characters
no No, analogue, 1,2,3,4,6 areas,
1-3 tanklevels
Area 1 Area 1,2,3,4,5,6
Select... System dependent
1 1-65535
1 1-65535
pressed. The characters change then in second
gear.
MONITORING AND CONFIGURATION
13