Troubleshooting - Motorola Radius CP100 Commercial Series User Manual

Troubleshooting

Symptom
No Power
Message not
transmitted
Hearing other
noises or
conversation on
a channel
Poor Audio
Quality
Try This:
Recharge or replace battery (NTN8971). Reposition or replace
alkaline batteries. For Nickel-Metal Hydride batteries, "Installing
the Nickel-Metal Hydride Battery" on page 9 or "Battery and
Charging Options" on page 14.
Make sure M is completely pressed while transmitting.
Recharge, replace and/or reposition batteries.
Verify the transmit light is illuminated while speaking.
Frequency or Interference Eliminator Code may be in use,
change on all radios if possible. See "Programming the
Interference Eliminator Code" on page 25.
Scramble Code is On (2-watt models only), and/or setting does
not match other radios' settings. See "Programming the
Scramble Feature" on page 26.
Bandwidth of radios does not match. See "Programming
Bandwidth (when allowable)" on page 26.
33