JVC KM-H3000 User Manual page 19

3. Press the AuxMem knob to set the Aux Bus
Recall Mode. You can choose from the following:
• NoRcll — Aux buses ignore the input saved
with the recalled memory and retain the
current input.
• Recall — Aux bus inputs change to the input
saved with the recalled memory.
For More Information on...
• saving and recalling switcher settings, refer to the
section "Using the Memory System" on page 31.
Customizing the Panel Glow
Panel buttons are set to a glow color which is used
when the button is not selected. This glow color can
be customized to your preference.
To customize the Panel Glow color:
1
2
1. Press MENU.
2. Press the USER Wipe Pattern button.
3. Press the Scheme knob to display the Color
Scheme menu.
4. Use the HUE knob to adjust the Panel Glow hue.
5. Use the SAT knob to adjust the Panel Glow
saturation.
6. Use the LUM knob to adjust the Panel Glow
luminance.
Note:
• It is not recommended to set the Panel Glow color
to red. Red indicates a source is on-air.
For More Information on...
• hue, saturation, and luminance, refer to the section
"Selecting Colors" on page 4.
Saving Color Schemes
You can save a custom Panel Glow color scheme so
that it may be recalled as needed.
4 5 6
To save a custom Panel Glow color scheme:
2
3 5
1. Modify the Panel Glow as described above, to
obtain the desired appearance.
2. Press MENU.
3. Press the USER Wipe Pattern button.
4. Press the Scheme knob to display the Color
Scheme menu.
5. Press NEXT until Save is displayed.
6. Rotate the Save knob to select the custom
scheme you wish to save.
7. Press the Save knob to save the color scheme.
8. Press the Confrm knob to commit the save (if
there was a color scheme saved to the selected
custom scheme, it is overwritten). Press the
Cancel knob to cancel the save.
Loading Color Schemes
You can load a custom color scheme or one of the
preset color schemes that are included on your
switcher.
To load a custom Panel Glow color scheme:
1
2 4
1. Press MENU.
2. Press the USER Wipe Pattern button.
3. Press the Scheme knob to display the Color
Scheme menu.
4. Press NEXT until Load is displayed.
5. Use the Load knob to select the color scheme
you want to load. You can select from a list of
presets or one of the custom color schemes you
have previously saved.
6. Press the Load knob to load the color scheme.
6 4
5 3
15