JVC KM-H3000 User Manual page 39

5. Press the Confrm knob to commit the change.
Press the Cancel knob to cancel the change and
return to the previous setting.
Resetting the Switcher
Resetting the switcher restores the user-defined
default settings..
To reset the switcher:
1
2
1. Press and hold MENU.
2. Press the RESET Wipe Pattern button.
To reset the switcher using an alternate method:
1. Press MENU.
2. Press the RESET Wipe Pattern button.
3. Press the RState Load knob.
All switcher settings are restored to the default
values.
Shared Parameters
Some parameters are shared between features and if
reset in one area, are reset in all areas that share that
parameter. The shared parameters are:
• Time — This value is shared between dissolves,
wipes, and DVE transitions.
• Limit — This value is shared between dissolves,
wipes, and DVE transitions.
• Pattern (Pattrn) — This value is shared between
wipes and mattes.
Resetting Individual Settings
You can reset individual settings to default values
rather than resetting the entire switcher.
To reset wipes:
1. Press and hold down WIPE.
2. Press the RESET Wipe Pattern button.
To reset dissolves:
1. Press and hold down DISS.
2. Press the RESET Wipe Pattern button.
To reset Key 1:
1. Press and hold down CHR KEY, AUTO SELECT,
or DVE.
2. Press the RESET Wipe Pattern button.
Note:
• The selected Chroma Key color and any Split Key
assignments are not reset.
To reset Key 2 or 3:
1. Press and hold down KEY 2 SEL (or KEY 3 SEL
on the KM-H 3000).
2. Press the RESET Wipe Pattern button.
When resetting a key, the selected Chroma Key
color and any Split Key assignments are not
reset.
Note:
• The selected Chroma Key color and any Split Key
assignments are not reset.
To reset Aux buses:
1. Press and hold down AUX SEL (KM-H 2500) or
AUX 1 or AUX 2 or AUX 3 (KM-H 3000).
2. Press the RESET Wipe Pattern button.
Resetting Menu Items
The values for particular parameters can be reset
individually. This allows you to restore the default
setting if you are unsatisfied with the adjusted values.
Some parameters are shared between features and,
if reset in one area, will be reset in all areas that share
that parameter.
To reset individual menu items:
1. Select the menu for the value you wish to reset.
2. Double press the knob associated with the value.
Restoring to Factory Defaults
You can restore your switcher to the factory default
settings. You may wish to do this when
troubleshooting problems with your switcher.
Restoring to factory defaults resets the entire
switcher. Save any configuration information to a
memory register if you wish to re-load it after
performing the factory default.
35