Table of Contents
Advertisement
Barco Media Server XHD-Series Safety Guide
3.
The USB System Restore drive contains the user guide and the recovery
software. To restore the system using the USB System Restore drive,
see the Restore section of the Barco Media Server XHD-Series User Guide.
1.1.3
Disconnect device
Where a disconnect device is not incorporated in the equipment, or where the plug on
the power supply cord is intended to serve as the disconnect device:
for PERMANENTLY CONNECTED EQUIPMENT, a readily accessible
disconnect device shall be incorporated external to the equipment.
for PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near
the equipment and shall be easily accessible.
1.2
Standards and safety
This section lists standards that apply to Barco Media Servers and describes safety
precautions that must be observed when installing and operating a product from Barco.
1.2.1
General safety instructions
Read this manual thoroughly before operating this equipment.
Adhere to all warnings in this manual.
Follow precisely all instructions for operating and use of this equipment.
Adhere to all local installation codes.
Retain this manual for future reference.
10
a.
If you wish to connect to more than two DVI devices,
you must use the active DisplayPort-to-DVI adapters
for the any conversions beyond the first two.
b.
To get all four outputs, connect the passive adapters
to ports 1 and 2, and connect the active adapters to
ports 3 and 4.
Warning
The mains power plug connected to the wall outlet must be easily accessible
at all times for all installation modes.
Section 1: Safety
Barco Pn: 60600319
Advertisement
Table of Contents
