Precautions - Barco XHD-Series Safety Manual

Hide thumbs Also See for XHD-Series:
Table of Contents

Advertisement

Barco Media Server XHD-Series Safety Guide
a commercial environment. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his or her own expense.
1.2.3

Precautions

Before operating the units, please read this manual thoroughly and retain
it for future reference!
Observe all warnings and instructions printed on the devices!
Barco Media Servers do not require any maintenance work or servicing.
Servicing should never be carried out by unauthorized personnel!
Never open the case of the unit without first disconnecting the power
supply cord!
To prevent fire or electrical shock hazard, do not expose this unit to rain
or moisture!
Do not place any warm or heat dissipating sources in the vicinity of the
unit.
This product should be operated from an AC power source!
Check that the voltage and frequency of your power supply match those
printed on the device label showing the rated electrical values!
If you are not sure of the type of AC power available, consult your
dealer or local power company!
This product is equipped with a 3-wire grounding plug, i.e. a plug fea-
turing a third (grounding) pin. This plug will only fit into a grounding-
type power outlet. This is a safety feature. If you are unable to insert the
plug into your outlet, contact your electrician to replace the obsolete
outlet. Do not defeat the purpose of the grounding-type plug!
This equipment must be grounded (earthed) via the 3-conductor AC
power cable supplied. (If the power cable supplied is not the correct
one, consult your dealer.)
Do not allow anything to rest on the power cord. Do not position this
product in places where people will walk on the cord. To disconnect the
cord, pull it out by the plug. Never pull the cord itself.
If an extension cord is used with this product, make sure that the total
of the ampere ratings on the products plugged into the extension cord
does not exceed the extension cord ampere rating.
12
Warning
For your own protection, observe the following safety precautions when in-
stalling and operating your device.
Section 1: Safety
Barco Pn: 60600319

Advertisement

Table of Contents
loading

Table of Contents