User Set Mode; Scrambler Function; Stun Function - Icom ic-F5122D Instruction Manual

■ User Set mode

The User Set mode allows you to set seldom-changed set-
tings, and you can "customize" the transceiver operation to
suit your preferences and operating style.
NOTE: While in the User Set mode, [Up], [Down] and [P0]
activate regardless of the assigned key functions.
Entering the User Set mode:
q Hold down [SET] for 1 second to enter the User Set
mode.
w Push [SET] several times to select the appropriate item.
Then push [CH Up] or [CH Down] to set the desired level
or option.
• In the User Set mode, the selectable items are preset by your
dealer. The presetable items are Backlight, Beep ON/OFF,
Beep Level, Ringer Level, SQL Level, AF Min Level, Mic
Gain, Battery Voltage, Horn, Signal Moni, Lone Worker and
System Info.
e Hold down [SET] for 1 second again to exit the User Set
mode.

■ Scrambler function

The voice scrambler function provides private communication
between stations while operating in the digital mode.
➥ Push [Scrambler] to toggle the scrambler function ON or
OFF.
• " " (Scrambler icon) appears when the function is ON.

■ Stun function

The dispatcher can send a signal that will stun, kill or revive
your transceiver.
When the Stun command is received, the transceiver be-
comes unusable. In that case, receiving a Revive command
or inputting the password* (p. 8) is necessary to operate the
transceiver again.
When a Kill command is received, the transceiver becomes
unusable (the transceiver switches to the cloning required
condition). In that case, cloning the transceiver is necessary
to operate the transceiver again.
* Depending on the pre-programmed settings.
See the operating guide for details of the Stun function
with the dPMR system operations. Ask your dealer for de-
tails.
BASIC OPERATION
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
12