Programmable Function Keys - Icom ic-F5122D Instruction Manual

1
PANEL DESCRIPTION

■ Programmable function keys

The following functions can be assigned to [UP], [DOWN],
[P0], [P1], [P2] and [P3] programmable function keys in the
Normal mode and the Shift mode. When [Shift] is assigned,
you can toggle between Normal mode and Shift mode, and
both key functions, assigned into the Normal mode and the
Shift mode, are available.
If [Shift] is not assigned to any key, the Shift mode cannot be
selected, and the Shift mode key functions are disabled.
Consult your Icom dealer or system operator for details con-
cerning your transceiver's programming.
CH UP AND DOWN KEYS
As described in the following topics, after pushing a pro-
grammed key, push [CH Up] or [CH Down] to select an op-
tion, setting, etc.
ZONE KEY
Push this key, then select the desired zone using [CH Up]/
[CH Down].
What is "zone"?— Certain channels are grouped together
and assigned to a zone, according to their intended to use.
For example, 'Staff A' and 'Staff B' are assigned to a "Busi-
ness" zone, and 'John' and 'Cindy' are assigned to a "Pri-
vate" zone.
3
SCAN START/STOP KEY
➥ Push to start and cancel scanning operation.
• When a scan is started with the Power ON Scan or Automatic
scan function, push this key to cancel it. The cancelled scan
resumes after the pre-programmed time period.
➥ Hold down this key for 1 second to display a scan group,
then push [CH Up] or [CH Down] to select the desired
one.
SCAN ADD/DEL (TAG) KEY
➥ Push to add the channel to, or delete it from, the current
scan group.
1. Push to display the scan group, then push [CH Up] or
[CH Down] to select the desired one.
2. Push to add the channel to, or delete it from, the selected scan
group.
3. Hold down for 1 second to exit the scan list selection mode.
➥ While a scan is paused on a non-priority channel, push this
key to delete the selected channel from the scan group.
Depending on the setting, the cleared channel is added
to the scan group again after the scan is cancelled.