When Replacing Dvd Deck - Toshiba MW27FPX Service Manual

[ When the removal of the DVD Deck ]
Before removing Pick Up PCB and DVD PCB connector, make the short circuit on the position as
shown Fig. 1 using a soldering. If you remove the DVD Deck with no soldering, the Laser may be
damaged.
[ When the installation of the DVD Deck ]
Remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD
PCB connector.

WHEN REPLACING DVD DECK

Fig. 1
A1-6
Make the sort circuit
using a soldering.
Pick Up PCB