When Replacing Dvd Deck; Disc Removal Method At No Power Supply - Toshiba VTD1551 Service Manual

[ When the removal of the DVD Deck ]
Before removing Pick Up PCB and DVD PCB connector, make the short circuit on the position as
shown Fig. 1 using a soldering. If you remove the DVD Deck with no soldering, the Laser may be
damaged.
[ When the installation of the DVD Deck ]
Remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD
PCB connector.

DISC REMOVAL METHOD AT NO POWER SUPPLY

1. Remove the Back Cabinet and TV//DVD/VCR Block. (Refer to item 1 of the DISASSEMBLY
INSTRUCTIONS.)
2. Rotate the Main Gear in the direction of the arrow by hand.
(Refer to Fig. 1)
3. Draw the Tray.

WHEN REPLACING DVD DECK

Fig. 1
Main Gear
Fig. 1
A1-2
Make the short circuit
using a soldering.
Deck CD
Pick Up PCB