Table of Contents
Advertisement
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
Remove the 6 screws 1.
1.
2.
Remove the Back Cabinet in the direction of arrow.
Front Cabinet
1
1
1
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1.
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
2.
Disconnect the following connectors:
(CP801, CP802B, CP803 and CP852).
3.
Remove the CRT PCB in the direction of arrow.
Front Cabinet
DISASSEMBLY INSTRUCTIONS
1
1
Back Cabinet
1
Fig. 1-1
CRT PCB
Fig. 1-2
1-3: TV/DVD/VCR BLOCK (Refer to Fig. 1-3)
Remove the 2 screws 1.
1.
2.
Disconnect the following connectors:
(CP303, CP404 and CP3603).
3.
Remove the TV/DVD/VCR Block in the direction of arrow.
Front Cabinet
1-4: DEFLECTION PCB (Refer to Fig. 1-4)
Remove the 2 screws 1.
1.
Remove the 4 screws 2.
2.
3.
Disconnect the following connectors:
(CP401, CP402, CP406 and CP3602).
4.
Remove the Deflection PCB in the direction of arrow.
DVD/VCR Block
B1-1
1
1
TV/DVD/VCR Block
1
1
Deflection PCB
2
2
2
2
Fig. 1-3
Fig. 1-4
Advertisement
Table of Contents
