Table of Contents
Advertisement
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
Remove the 6 screws 1.
1.
2.
Remove the Back Cabinet in the direction of arrow.
Front Cabinet
1
1
1
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1.
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
2.
Disconnect the following connectors:
(CP803, CP854 and CP1002).
3.
Remove the CRT PCB in the direction of arrow.
Front Cabinet
DISASSEMBLY INSTRUCTIONS
1
1
1
Back Cabinet
Fig. 1-1
CP803
CP854
CP1002
CRT PCB
Fig. 1-2
1-3: POWER SW PCB (Refer to Fig. 1-3)
Remove the 2 screws 1.
1.
2.
Disconnect the following connector: (CP1704).
3.
Remove the Power SW PCB in the direction of arrow.
Front Cabinet
1-4: TV/DVD/VCR BLOCK (Refer to Fig. 1-4)
Remove the 2 screws 1.
1.
2.
Disconnect the following connectors:
(CP352, CP402 and CP1702).
3.
Remove the TV/DVD/VCR Block in the direction of
arrow.
Front Cabinet
B1-1
Power SW PCB
1
1
CP1704
CP352
1
CP1702
CP402
TV/DVD/VCR Block
Fig. 1-3
1
Fig. 1-4
Advertisement
Table of Contents
