Table of Contents
Advertisement
Chapter 2. Disassembly and reassembly of major point ------
Chapter 3. Engine accessories ------------------------------------
Chapter 4. HST system ---------------------------------------------
Chapter 5. Transmission
Chapter 6. Front axle (4WD)
Chapter 7. Rear axle and Brakes ---------------------------------
Chapter 8. Power steering system---------------------------------
Chapter 9. Hydraulic system -------------------------------------
Chapter 10. Electric accessories and instruments ----------
T233/T273
SERVICE MANUAL
------------------------------------
-----------------------------------
---------------------------------
HST TRACTOR
HST
01
02
03
04
05
06
07
08
09
10
-----
11
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the T233 HST and is the answer not in the manual?
Questions and answers
Replacing Rear Axel gaskets. Tractor is loosing oil on both sides.
To replace the rear axle gaskets on a TYM T233 HST tractor that is losing oil on both sides, follow these steps:
1. Secure the Tractor: Jack up the tractor and ensure it is supported with stable stands. Do not rely on the jack alone, as it is unstable.
2. Remove the Rear Wheels: Take off the rear wheels to access the axle housing.
3. Disassemble the Rear Axle Housing: Carefully remove the necessary components to access the gasket.
4. Remove the Old Gasket: Clean the gasket surface thoroughly to remove any debris or old gasket material.
5. Install the New Gasket: Ensure the gasket is properly aligned and seated in place.
6. Reassemble the Rear Axle Housing: Reinstall all parts, making sure they are securely fastened.
7. Check the Bearings: Ensure that installed bearings turn smoothly.
8. Refill Oil: Refill the axle with the appropriate oil.
9. Test for Leaks: After reassembly, check for leaks and ensure proper operation.
Use only authorized TYM parts to avoid performance issues or damage.
This answer is automatically generated