Changing The Combination Of Video/Audio Input Jacks - Yamaha RX-V379 Owner's Manual

1 2 3 4 5 6 7 8

Changing the combination of video/audio input jacks

If the combination of video/audio input jacks available on the unit does not match your
video device, change its combination according to the output jacks of your device. You
can connect a video device that has the following video/audio output jacks.
Output jacks on video device
Video Audio
Digital optical
HDMI Digital coaxial
Analog stereo
Composite video Digital optical
Necessary setting
For example, if you have connected a video device to AV 2 (VIDEO) and AUDIO 1
(OPTICAL) jack of the unit, change the combination setting as follows.
The unit (rear)
AV 2 (VIDEO) jack
OPTICAL
(TV)
AUDIO 1
AUDIO 1 (OPTICAL) jack
Input jacks on the unit
Video Audio
HDMI 1–4 AUDIO 1 (OPTICAL)
AV 1 (COAXIAL)
HDMI 1–4
AUDIO 2 (COAXIAL)
HDMI 1–4 AV 2–3 (AUDIO)
AV 1–3 (VIDEO) AUDIO 1 (OPTICAL)
Video output
(composite video)
VIDEO
V V
Video device
OPTICAL
O O
Audio output
(digital optical)
1
After connecting external devices (such as a TV and playback
devices) and power cable of the unit, turn on the unit.
2
Press INPUT to select "AV 2" (video input jack to be used) as the
input source.
3
Press OPTION.
4
Use the cursor keys (q/w) to select "Audio In" and press ENTER.
CHARGE ENHANCER STEREO TUNED
OUT
ECO
Audio In
5
Use the cursor keys (e/r) to select "AUDIO 1" (audio input jack to be
used).
CHARGE ENHANCER STEREO TUNED
OUT
ECO
Audio••AUDIO 1
6
Press OPTION.
This completes the necessary settings.
If you select "AV 2" as the input source by pressing INPUT, the video/audio played back
on the video device will be output from the unit.
20
En
SLEEP MUTE
VOL.
ADAPTIVE DRC VIRTUAL
SLEEP MUTE
VOL.
ADAPTIVE DRC VIRTUAL