Insert Batteries; Charge Lipo Battery - Carson Cessna 182 Skylane Instruction Manual

Insert batteries

1. Remove the battery cover
• Do not mix old and new dry cell or rechargeable batteries.
• Do not mix old and new dry cell or rechargeable batteries.
• Do not attempt to charge non-rechargeable batteries.

Charge LiPo battery

Warning!
During charging place the charger and battery on a heat-resistant surface and monitor constantly until the charging process is complete.
Rechargeable
battery
Plug the supplied charger to a USB power socket adapter or USB
socket. Now connect the flight battery to the charger. The red LED
glows and goes out upon completion of the charging process.
2. Insert 6 x AA batteries ensuring correct polarity. Then close the battery compartment.
CARSON Cessna 182 Skylane GHz 100% RTF 500505028
Charger
After the battery is fully charged, remove the battery from the
charger immediately.
Please take careful note of the safety
information on p. 7.
USB connector
23