Insert The Driving Battery - Carson Rapscallion brushless Instruction Manual

b. Insert the Driving Battery
GB
1 Open the boot cover.
2 Insert the fully charged power pack.
3 Fix the power pack with the "Velcro" tape attached to the hull.
4 The transmitter must be switched on before the power pack is
connected to the ESC. Observe the correct polarity.
1
3
5
6
22 CARSON Rapscallion brushless 500108010
5 Hook the rubber retainer into the eye on the cover.
6 Now replace the boat cover on the hull. Ensure that it is properly
seated.
The cover must then be sealed all round the
edge with adhesive tape!
2
4
Red
+ cable
-
Black
cable
+
-